home           campers           photos           media           showdates           contact           links 

STRONG ◦ DURABLE ◦ MODERN ◦ ROBUST ◦ TOUGH
HEAVY DUTY ◦ LIGHT WEIGHT
 

Campers

 

 

 

    Poly Campers & Trailers produce their own polyethylene one piece rota-moulded trailer tub with matching lid. Doors & hatches are then easily cut into the tub.

    Owner Glen Hudson has been working on a new design of camper trailer with an "ultimate storage" system, creating some interesting features in the form of a two tier storage system.

    The upper most storage area is accessed from under the lift up bed on both side & rear opening model campers, as well as soft & hard floor units. This area is divided into 15 separate compartments 180mm deep.

    In addition to this there are six poly trays 400mm x 600mm x 250mm deep under the bed which is below the top storage area accessed from the rear tailgate.

    There is also a poly toolbox 1800 x 600 x 500 deep for the storage of lighter & larger gear.

    The other innovation is a framed floor which can be expanded to form a larger floor area than the original trailer top. The framed floor is covered in a heavy vinyl to form the flip lid top cover. The floor is flexible and adjusts to suit the terrain, no need for pegs!!

 

 

 

 

 

 

 

 

 

 

Oz Traila Campas  

    Poly Campers & Trailers can now be purchased featuring the range of OZtrail Camper Tents on Glen's own polyethylene one piece rota-moulded trailer tub.

    The OZtrail Camper Trailer Tents include the following features:

1. 340gsm SatProof™ 600+ Canvas
A heavyweight canvas, which will no doubt shield you from anything Mother Nature
has in store.

2. Silver Coated Canvas Roof
A heavyweight canvas, rolled under pressure to accept the silver coating that blocks
out more than 98% of UV radiation and heat.

3. Heavyweight PVC Floor
A heavy duty puncture resistant PVC floor.

4. Galvanised Steel Poles
Ensuring the reliability and longevity of your camper trailer tent poles.

5. No-See-Um Mesh
A high quality fi ne mesh panel that provides complete insect protection.

6. DuoDoor™
A door with mesh and fabric zippered panels allowing single zip effortless access.

7. #10 Coil Zips
Sturdy zips for easy use of all doors and windows.

8. 15cm Open Cell Foam Mattress
A thick, comfortable open cell foam mattress that will ensure a relaxing night’s sleep,
while underneath the mattress is an access hatch to the trailer.

9. Removable Bedroom Curtain
For that extra bit of privacy to separate the bedroom and living area.

10. Ladder
Makes that short climb into bed even easier, now a standard feature.

11. Awning Poles
Create a large shade space around the front of your camper trailer tent, or enclose
with the optional sunroom available at extra cost.

12. PVC Dust Cover
Keep your camper trailer tent clean and tidy while on the open road.

All Oztrail camper tents are not recommended for extreme off-road use.

 

Oztrail range to suit our Poly Camper Trailer

 

 

Camper 6

The Camper 6 is a split level side folding camper which is quick to set up and includes a large front awning/sunroom area, zip off awnings, two door accesses and separate sleeping and living areas. It fits on a 6x4 trailer, and optional sunrooms and other accessories are available at extra cost. Awning poles, pegs and ropes are included, as well as all the necessary hardware to mount the camper to your trailer.

 

 

 

 

Camper 7

The Camper 7 is a split level side folding camper which is quick to set up and includes a large front awning/sunroom area, zip off awnings, single door access and separate sleeping and living areas. It fits on a 6x4 trailer, and optional sunrooms and other accessories are available at extra cost. Awning poles, pegs and ropes are included, as well as all the necessary hardware to mount the camper to your trailer.

 

 

 

 

Camper 8

The Camper 8 is a two room rear folding camper which is quick to set up and includes a large front awning/sunroom area, zip off awnings, three door accesses and a generously sized living area. It fi ts on a 7x4 trailer, and optional sunrooms and other accessories are available at extra cost. Awning poles, pegs and ropes are included, as well as all the necessary hardware to mount the camper to your trailer.

 

 

 

 

 

Camper 8 twin

The Camper 8 Twin is a rear folding camper which is quick to set up and can build into three or four large rooms. A new design includes an extra large awning/sunroom area on the front and rear, zip off awnings, a rear canvas sunroom, three door accesses and a generously sized living area. It fits on a 7x4 trailer, and optional sunrooms and other accessories are available at extra cost. Awning poles, pegs and ropes
are included, as well as all the necessary hardware to mount the camper to your trailer.

 

 

 

 

Camper 9

The Camper 9 is a side folding camper which is quick to set up and includes a large front awning/sunroom area, zip off awnings and three door accesses. It fits on a 7x4 trailer, and optional sunrooms and other accessories are available at extra cost. Awning poles, pegs and ropes are included, as well as all the necessary hardware to mount the camper to your trailer.

 

 

 

 

Camper 10

The Camper 10 is a three room side folding camper which is quick and easy to set up. An innovative second bedroom with windows is included, as well as a large front awning/sunroom area, zip off awnings and two door accesses. It fits on a 7x4 trailer, and optional sunrooms and other accessories are available at extra cost. Awning poles, pegs and ropes are included, as well as all the necessary hardware to mount the camper to your trailer.

 



 

 

Camper 12

The Camper 12 is a three room side folding camper which is quick to set up and includes an extra large front awning/sunroom area, zip off awnings and three door accesses. It fits on a 7x4 trailer, and optional sunrooms and other accessories are available at extra cost. Awning poles, pegs and ropes are included, as well as all the necessary hardware to mount the camper to your trailer.

 

 

 

 

Camper 12 twin

The Camper 12 Twin is a side folding camper which is quick to set up and can build into four or five large rooms. A new design includes an extra large front awning/sunroom area on the front and rear, zip off awnings, a rear canvas sunroom with a hanging partition divider, three door accesses and a generously sized living area. It fits on a 7x4 trailer, and optional sunrooms and other accessories are available at extra cost. Awning poles, pegs and ropes are included, as well as all the necessary hardware to mount the camper to your trailer.